Search Engine

Use the below search engine to narrow your search within the blog.

And don't forget to also visit our YouTube channel!

Camera Repair Search Engine

Custom Search
TRANSLATOR TRADUCTOR अनुवादक TRADUCTEUR TAGASALIN ÜBERSETZER

TRANSLATOR TRADUCTOR अनुवादक TRADUCTEUR TAGASALIN ÜBERSETZER

Sunday, May 18, 2008

Simple Fixes for Cameras that Won't Take a Picture When the Shutter Button is Pressed

Everything seems fine with your camera, except that when you press the shutter button nothing happens! On Canon cameras you may also notice flashing yellow/orange lights by your viewfinder. Try switching to any mode other than automatic, turn off the flash, and press the shutter button. Did the camera take a picture? If so, continue reading.

Many cameras have a safety feature that prevents the flash capacitor from charging if the case is opened. This is to lessen the chance of electric shock. They usually use one or two of the screws along the perimeter of the camera to complete a circuit that lets the processor know that the case is closed. Verify that all the screws are in place along the perimeter of your camera, and that there are no gaps along the perimeter seams. If you're missing a screw, try using one of the others to replace it.

If they're all there, next thing to check is the batteries. The brand that you're using may have reached its shelf life, or just may not have sufficient power to charge the flash capacitor. Try a better brand, or better yet rechargeable NiMH batteries.

If the above didn't help, then the flash tube or its circuit is probably at fault. In this case, would then recommend professional repair. This repair is somewhat difficult, requires some soldering, has some danger of electrical shock, and goes beyond what I'd like to describe here.